The Savings in Multiple Part Workholding

"The Proof is in the Productivity"


			CNC MACHINING Holding 7 parts at the same time saves 63.5 seconds per piece DESCRIPTION: CNC Machining of a 9/16" hex with four (4) tool changes Tool 1: Face mill and side mill two sides Tool 2: Spot drill in four places Tool 3: Drill four holes to .125" Tool 4: End mill an arc WORKHOLDING: Conventional Workholding: 1 piece at a time Lassy Rapid Load System: 7 pieces at a time PRODUCTIVITY GAIN: CONVENTIONAL PIECES PER HOUR = 36 LASSY SYSTEM PIECES PER HOUR = 99 INCREASE IN PRODUCTION = 63 pcs.@ 175%

		MILLING Holding 9 parts at one time Saves 31.1 seconds per piece DESCRIPTION: Milling a short slot 0.093" x 0.093" in 3/8" diameter 4130 CRS WORKHOLDING: Conventional Workholding: 1 piece at a time Lassy Rapid Load System: 9 pieces at a time PRODUCTIVITY GAIN: CONVENTIONAL PIECES PER HOUR = 103 LASSY SYSTEM PIECES PER HOUR = 923 INCREASE IN PRODUCTION = 820 pcs. @ 631%

		GRINDING Holding 11 parts each time Saves 34.5 seconds per piece DESCRIPTION: Surface grinding shoulder cylinders A2 hardened to 55-60 Rockwell Grinding to a 63 micro finish and square within 0.001" to the diameter WORKHOLDING: Conventional Workholding: 1 piece at a time Lassy Rapid Load System: 11 pieces at a time PRODUCTIVITY GAIN: CONVENTIONAL PIECES PER HOUR = 95 LASSY SYSTEM PIECES PER HOUR = 1,028 INCREASE IN PRODUCTION = 933 pcs. @ 982%

			DEEP SLOT MILLING Holding 5 parts for each cycle Saves 30.4 seconds per piece DESCRIPTION: Deep slot milling in a 3/4" square 1018 CRS Milling a 1/8" x 7/8" slot with a 1/8" gripping surface depth WORKHOLDING: Conventional Workholding: 1 piece at a time Lassy Rapid Load System: 5 pieces at a time PRODUCTIVITY GAIN: CONVENTIONAL PIECES PER HOUR = 60 LASSY SYSTEM PIECES PER HOUR = 120 INCREASE IN PRODUCTION 60 pcs. @ 100%
	Send us a part and a print. We'll design and recommend a workholding system that maximizes your production. No obligation.